ABS 3D filament is a fiber for 3D printers that is strong, rigid. The material is also very resistant to chemical influences and heat.
Characteristic features
Optimized for FDM (FFF) 3D printers
Excellent adhesion to heated board, Kapton, BuildTak, glass, etc.
Perfect adhesion of layers
Easy removal of supports
High thermal stability
Printing difficulty higher than PLA or PET-G (enclosure recommended).
Potentially hazardous fumes are produced during printing because ABS contains styrene
Can be glued and smoothed with acetone
The material excels in high adhesion to the substrate. Therefore, it is suitable to use, for example, kores or hairspray as a separator. Objects should be (!) printed in a closed box to ensure slower cooling of the printout. This prevents rapid shrinkage and possible cracking of the layers.
Recommended temperatures apply to 0.4mm nozzle printing and a speed of approximately 60mm / s
For higher speeds, the temperature must be raised accordingly
For a nozzle with a larger diameter of 0.6 and more, the temperature must be increased to allow the plastic to melt
It is also possible to slightly increase the temperature for a larger object
The opposite is also true, lower speed, smaller nozzle, smaller object = lower hotend temperature
Cooling 0-30%. It is better not to cool a larger object at all
TIP
If you have trouble removing the printout from the tray, place the printout and tray in the refrigerator or freezer. If it still cannot be removed, put it in lukewarm water. The procedure can be repeated. When removing "by force", the pad may be damaged !!!
Filament parameters:
Weight of printing string 850 g
Length of the printing string approx. 340 m
Diameter 1.75 mm + - 0.02 mm
Print temperature 230-250 C
Heated bed temperature 100-110 C
The spool with the printing string is vacuum packed
Dimensions of spool with filament
Outer diameter 200 mm
Shaft bore diameter 55 mm
Coil width 70 mm
Filament package dimensions (box): 80 x 230 x 200 mm
Made in Czech Republic. This product is made of virgin granulate. It does not contain recycled material or other undesirable additives.