AURAPOL PLA 3D Filament Zielony L-EGO 1 kg 1,75 mm


PLA Premium 3D Filament printing string for 3D printers.
- Made in Czech Republic.
- This product is made of virgin granulate.
- It does not contain recycled material or other undesirable additives.
Parameters:
- String weight 1000 g
- Length approx. 340 m
- Diameter 1.75 mm + - 0.02 mm
- Print temperature 210-230 C
- Heated bed temperature 40-60 C
- The spool with string is vacuum packed.
- Made in Czech Republic
Coil dimensions:
- Outer diameter 200 mm
- Shaft bore diameter 55 mm
- Coil width 70 mm
- Weight of empty coil 250gr
- Package dimensions (box): 80 x 230 x 200 mm
PLA (polyactid acid) is a degradable BIO material.
It is very popular for 3D printing and does not produce an odor when printed.
Material advantages:
- Very easy printing (melting point 175 C, possibility to repeatedly heat without degradation)
- The material is very hard and tough.
- Suitable for printing small and large objects with fine details without deformation.
- Harmless to health.
Disadvantages of the material:
- above 60 C it loses mechanical strength.
- not suitable for long-term outdoor use (biodegradability, not resistant to UV radiation.)
Color | RAL N/A (LEGO green) |
---|---|
Weight | 1 kg |
String diameter | 1.75 mm |
Jan Rehor
PositivesHezký sytá barva
Super cena
Dobrá kavlita
PositivesHezký sytá barva
Super cena
Dobrá kavlita
Negatives
Negatives
Aleš Klusák
Positives+ stálost a věrnost barvy
+ snadná tisknutelnost
+ lze použít tiskové profily Průšamentu (jen je třeba zvýšit teplotu HE na 220 stup.)more
Positives+ stálost a věrnost barvy
+ snadná tisknutelnost
+ lze použít tiskové profily Průšamentu (jen je třeba zvýšit teplotu HE na 220 stup.)
Negatives- zatím nic :)
Negatives- zatím nic :)
Jakub Sieklik
PositivesPekná farba a ľahká tlač.
Pri 3x testu "Flow" na 215°C, 220°C a 225°C diel dobre zapadne pri 100% flow a pri 98% flow má dostatočnú volu a drží ...more
PositivesPekná farba a ľahká tlač.
Pri 3x testu "Flow" na 215°C, 220°C a 225°C diel dobre zapadne pri 100% flow a pri 98% flow má dostatočnú volu a drží.
Pravidelne tlačím 0.4 (0.2) na 215°C a 0.8 (0.36) na 225°C so skvelými výsledkami.
NegativesZatiaľ žiadne.
NegativesZatiaľ žiadne.
SkeptikCz
Positives¨Snadný tisk a příjemná barva
Positives¨Snadný tisk a příjemná barva
Negatives
Negatives
Martin Hladký
PositivesBarva odpovídá předpokladu
PositivesBarva odpovídá předpokladu
Negatives
Negatives
Pavel Böhm
Positivessuper tisk, hezká barva, všechny L-EGO barvy jsou super
Positivessuper tisk, hezká barva, všechny L-EGO barvy jsou super
Negatives
Negatives
Pavel Štěpaník
PositivesVše OK
PositivesVše OK
Negativesnic
Negativesnic
Roman Fajt
PositivesNaprostá spokojenost.
PositivesNaprostá spokojenost.
Negatives
Negatives
Tomáš Voplakal
PositivesBezproblémový tisk
Barva
Kvalita
PositivesBezproblémový tisk
Barva
Kvalita
NegativesNic
NegativesNic
Milan Zelník
Positivespěkna barva, bezproblémový tisk
Positivespěkna barva, bezproblémový tisk
Negatives
Negatives