PLA Premium 3D Filament printing string for 3D printers.
- Made in Czech Republic.
- This product is made of virgin granulate.
- It does not contain recycled material or other undesirable additives.
Parameters:
- String weight 1000 g
- Length approx. 340 m
- Diameter 1.75 mm + - 0.02 mm
- Print temperature 210-240 C
- Heated bed temperature 40-60 C
- The spool with string is vacuum packed.
- Made in Czech Republic
Coil dimensions:
- Outer diameter 200 mm
- Shaft bore diameter 55 mm
- Coil width 68 mm
- Weight of empty coil 250gr
- Package dimensions (box): 80 x 230 x 200 mm
PLA (polyactid acid) is a degradable BIO material.
It is very popular for 3D printing and does not produce an odor when printed.
Material advantages:
- Very easy printing (melting point 175 C, possibility to repeatedly heat without degradation)
- The material is very hard and tough.
- Suitable for printing small and large objects with fine details without deformation.
- Harmless to health.
Disadvantages of the material:
- above 60 C it loses mechanical strength.
- not suitable for long-term outdoor use (biodegradability, not resistant to UV radiation.)
Parameters
Color | RAL N/A (LEGO blue) |
---|---|
Weight | 1 kg |
String diameter | 1.75 mm |
Color | RAL N/A (LEGO blue) |
---|---|
Weight | 1 kg |
String diameter | 1.75 mm |
Martin Vrba Verified review
PositivesSkvělá barva, krásně se tiskne
NegativesŠpulka je moc vysoká a překáží vodiči špulky v Anycubic ACE pro, avšak to není takový problém na který by nebylo 3D tisknutelné řešení.more
Jiří Velechovský Verified review
PositivesSpokojen jako vždy! Přesně odpovídá popisu. Hezká barva.
Negatives
Marián Arpáš Verified review
PositivesSuper materiál, krásna tlač cez BambuLab 👍 môžem len odporučiť 👍
Negatives
Kamča Verified review
PositivesTiskne se z ní vcelku dobře.
NegativesZe 3 špulek se mi jedna asi v polovině sekla, protože neměla průměr 1,75, ale nnohem větší a ucpala vodící trubičku takovým způsobem, že jsem ji nemoh ...more