AURAPOL PLA 3D Filament WOOD CORK 850 g 1,75 mm

WOOD filament contains approximately 40% wood particles.
Recommended nozzle 0.6 and larger.
(Tested on a 0.5 nozzle, but we still recommend at least a 0.6.)

PLA Premium 3D Filament printing string for 3D printers.

• Made in Czech Republic.
• This product is made of virgin granulate.
• It does not contain recycled material or other undesirable additives.

Parameters:

• String weight 850 g
• Length approx. 306 m
• Diameter 1.75 mm + - 0.02 mm
• Print temperature 210-240 C
• Heated bed temperature 40-60 C
• The spool with string is vacuum packed.
• Made in Czech Republic

Coil dimensions:

• Outer diameter 200 mm
• Shaft bore diameter 55 mm
• Coil width 68 mm
• Weight of empty coil 250gr
• Package dimensions (box): 80 x 230 x 200 mm

PLA (polyactid acid) is a degradable BIO material.

It is very popular for 3D printing and does not produce an odor when printed.

Material advantages:

• Very easy printing (melting point 175 C, possibility to repeatedly heat without degradation)
• The material is very hard and tough.
• Suitable for printing small and large objects with fine details without deformation.
• Harmless to health.

Disadvantages of the material:

• above 60 C it loses mechanical strength.
• not suitable for long-term outdoor use (biodegradability, not resistant to UV radiation.)