PLA Premium 3D Filament printing string for 3D printers.
- Made in Czech Republic.
- This product is made of virgin granulate.
- It does not contain recycled material or other undesirable additives.
Parameters:
- String weight 1000 g
- Length approx. 340 m
- Diameter 1.75 mm + - 0.02 mm
- Print temperature 210-240 C
- Heated bed temperature 40-60 C
- The spool with string is vacuum packed.
- Made in Czech Republic
Coil dimensions:
- Outer diameter 200 mm
- Shaft bore diameter 55 mm
- Coil width 68 mm
- Weight of empty coil 250gr
- Package dimensions (box): 80 x 230 x 200 mm
PLA (polyactid acid) is a degradable BIO material.
It is very popular for 3D printing and does not produce an odor when printed.
Material advantages:
- Very easy printing (melting point 175 C, possibility to repeatedly heat without degradation)
- The material is very hard and tough.
- Suitable for printing small and large objects with fine details without deformation.
- Harmless to health.
Disadvantages of the material:
- above 60 C it loses mechanical strength.
- not suitable for long-term outdoor use (biodegradability, not resistant to UV radiation.)
Mykhailo Braiko Verified review
PositivesLevné, dobré navíjení
NegativesK zaseknutí dochází pravidelně (tiskárna bambulab x1c AMS)
Patrik Adamčiak Verified review
Positivesskvela na prototyping vidno cez steny aj vnutorne vyplne, vacinu modelou tlačím najprv z naturalu
Negatives
David Dobšák Verified review
Positives
Negativespotřebuje alespoň 3-4 zdi aby neprosvítal infill na povrchu