Using 3D Prints Made of PLA and PETG in Contact with Food

A common question. Sometimes it's a cookie cutter, sometimes a bowl for nuts, a toothbrush holder, or even a coffee mug. And more and more often it comes from people who want to sell their prints. The answer isn't a simple “yes” or “no”. That's why we wrote it all down as simply as possible, to give you at least a basic orientation on the topic.

What our 3D filaments are made of

First, what you get on the spool.

PLA is made from Ingeo 4043D granules from the American company NatureWorks. It is one of the most widely used PLA materials in the world. The same type is also used to make food packaging.

PETG is made from a copolyester from the European manufacturer Selenis. This material has been used for years in films for food packaging.

Both raw materials are approved for food contact by their manufacturers.
We will gladly provide the TDS and SDS on request.

Our PLA and PETG are certified for food contact

We didn't stop at a quality raw material. Our PLA and PETG 3D filament is certified for food contact. The certificate confirms that the material you receive from us on the spool is suitable for this purpose. So it's not only about what we make the filament from – the certificate applies to the finished filament.

For you this means the foundation is sound. But what you print from the filament and how you use it is something a certificate can't settle. We'll explain why right away.

Why that still doesn't mean every print is “food-safe”

Whether a finished product is safe depends on the whole journey from the spool to your table.

A comparison with flour helps. Even the best flour doesn't mean good bread. It depends on who bakes it, in what, and how cleanly.

With 3D printing it looks like this:

1. Layers and gaps. A print isn't smooth like a glass from a shop. Between the layers there are tiny gaps you can't see with the naked eye. Food residue and bacteria settle in them and a sponge can't get them out. A cookie cutter you use once a year for gingerbread doesn't mind. A bowl for daily muesli with milk is a different story.

2. The printer. A completely different material may have passed through the nozzle before, and its residue can end up in the new print. In addition, common brass nozzles can contain a small amount of lead. Anyone who is serious about food uses a dedicated stainless steel nozzle. *

3. Heat. PLA starts to soften at around 55–60 °C. Hot tea, a dishwasher or a car in summer, and a PLA mug loses its shape. PETG withstands more, but it is not a material for boiling water either.

4. Post-processing. Varnish, paint, glue or filler are not part of our filament, so the certification doesn't cover them. Anything you apply to a print must itself be intended for food contact.

Printing at home for yourself

If you print for yourself, your family or friends and don't sell anything, it's simple. You are mainly responsible to yourself and common sense is enough.

Examples:

Cookie cutters – yes, no worries. Contact with the dough is short and the dough is baked afterwards. After use, wash the cutter in lukewarm water and let it dry. Don't put it in the dishwasher.

Cookie stamp or marzipan mold – similar to cookie cutters. Short contact and hand washing.

Bowl for nuts, candy or unpeeled fruit – fine. Dry food and short contact are the safest combination.

Toothbrush holder, spice stand, bag holder – no problem. They don't touch food at all.

Coffee or tea mug – not recommended. Heat, moisture and daily washing are exactly what a print doesn't like.

Drinking bottle, everyday lunch box – only with a surface treatment (see below), otherwise better not.

Cutting board – no. A knife makes grooves, and bacteria cling to them even more than to the layers.

How to do it as well as possible:

  • print with a dedicated stainless steel nozzle that you don't use for other materials,

  • set a higher temperature so the layers bond as well as possible and there are fewer gaps,

  • for items used more often, coat the surface with epoxy resin intended for food contact. It seals all the gaps and the print can be washed normally,

  • wash by hand in lukewarm water, not in the dishwasher,

  • as soon as a print is scratched or cracked, print a new one.

Printing to sell

As soon as you sell your prints, for example at a market or in your own e-shop, the rules change. By law you then become a manufacturer of an item intended for food contact. The same obligations apply to you as to a company that makes plastic cups or lunch boxes.

Let's look at an example. Jane prints animal-shaped cookie cutters and sells them online. Our certificate proves that her input material is in order. But she herself is responsible for the cookie cutter as a finished product. That's why she must:

  • Issue a declaration of conformity for her product. It is a document confirming that the cookie cutter complies with European rules for food contact. Our filament certificate serves her as one of the supporting documents.

  • Have the product tested. An accredited laboratory checks whether more substances than allowed migrate from the finished product into food. The specific product is tested, not the filament.

  • Always produce the same way and keep things in order. The same material, the same print settings, a clean printer, and records of which spool each batch came from. If something goes wrong, she must be able to trace which pieces are affected.

  • Label the product correctly. Either with the text “for food contact” or with the well-known glass-and-fork symbol. Plus instructions on how to use the product, for example “hand wash only, not suitable for dishwasher or hot food”.

It sounds complicated, and for an individual it really isn't trivial. Inspections are carried out by the hygiene authorities and fines are not small. Laws and regulations may change over time, so we recommend contacting the relevant authorities.

In practice: If you want to sell something that only doesn't touch food (a spice stand, a napkin holder, decorations), you don't have to deal with any of this. But as soon as you sell a cookie cutter, a bowl or anything that comes into contact with food, expect the obligations above. We will gladly provide supporting documents for our filament.

Summary

Our PLA and PETG are certified for food contact and are made from raw materials commonly used in food packaging. It is a solid foundation. But whether your print will be safe too depends mainly on how and for what you use it.

  • At home for yourself: cookie cutters, bowls for dry items and short contact are fine. Hot drinks, everyday tableware and cutting boards better not.

  • For sale: you are the manufacturer. Don't sell food-contact products without a declaration of conformity, tests and labeling.

And if you're not sure, write to us. We'll gladly advise.


Author's note: but you'd better not read this :-)
*
The amount of lead that could be released from a brass nozzle into a print has never been measured in a laboratory by anyone so far. It is such a tiny amount that it can't even be detected.
**
I printed a lot of coffee mugs (PLA HT110 without certification) for my own use (coffee drinking) and I'm still here.
Cookie cutters? I'd die of obesity long before PLA toxicity.

%s ...
%s
%image %title %code %s
%s